dee Concrete

Radius Curb & Gutter Forms Commonly Ordered Sets

dee's radius curb and gutter forming system consists of a back form, face form, division plate, and top spreader. Back and front forms are standard radius flatwork forms with the back form taller than the front form.

While dee will fabricate curb and gutter front forms, back forms, division plates, and curb face forms to meet ANY curb and gutter specification, there are 5 basic industry-standard configurations for radius curb & gutter concrete placement.These most commonly ordered sets include: vertical face, battered face, bottom radius, top and bottom radius and drive over.

The following tables list the dee components required to form 100 outside perimeter feet of these five most commonly ordered radius curb and gutter setups (assuming a standard 12" curb back and a 6" gutter):

Vertical Face (no batter)

100' typical verical face (dee type A)

QTY. PART # DESCRIPTION
10 507 12" x 10' radius (back) forms - 7 pocket
10 507 6" x 10' radius (gutter) forms - 7 pocket
10 516 6" x 10' radius curbface form - vertical face, type A
40 625 Heavy duty lock clamps
10 339 12" x 24" vertical full division plate, type A
50 340 12" x 24" vertical skeleton division plate, type A
140 201 3/4" x 24 " form pins
Total Weight for 100 linear feet = 1,930 lbs.

Battered Face (no radius)

100' typical battered face (dee type B)

QTY. PART # DESCRIPTION
10 507 12" x 10' radius (back) forms - 7 pocket
10 507 6" x 10' radius (gutter) forms - 7 pocket
10 516 6" x 10' radius curbface form - battered face, type B
40 625 Heavy duty lock clamps
10 339 12" x 24" battered face, no radius full division plate, type B
50 340 12" x 24" battered face, no radius vertical skeleton division plate, type B
140 201 3/4" x 24 " form pins
Total Weight for 100 linear feet = 1,930 lbs.

Bottom Radius

100' typical battered singel radius (dee type J)

QTY. PART # DESCRIPTION
10 507 12" x 10' radius (back) forms - 7 pocket
10 507 6" x 10' radius (gutter) forms - 7 pocket
10 516 6" x 10' radius curbface form - battered single radius, type J
40 625 Heavy duty lock clamps
10 339 12" x 24" full division plate - battered single radius, type J
50 340 12" x 24" skeleton division plate - battered single radius, type J
140 201 3/4" x 24 " form pins
Total Weight for 100 linear feet = 1,930 lbs.

Top and Bottom Radius

100' typical top & bottom radius (dee type S)

QTY. PART # DESCRIPTION
10 507 12" x 10' radius (back) forms - 7 pocket
10 507 6" x 10' radius (gutter) forms - 7 pocket
10 516 6" x 10' radius curbface form, type S
40 625 Heavy duty lock clamps
60 315 6" curb - top spreaders
10 339 12" x 24" full division plate, type S
50 340 12" x 24" skeleton division plate, type S
140 201 3/4" x 24 " form pins
Total Weight for 100 linear feet = 2,015 lbs.

Drive Over

100' typical drive over (dee type E)

QTY. PART # DESCRIPTION
10 507 12" x 10' radius (back) forms - 7 pocket
10 507 6" x 10' radius (gutter) forms - 7 pocket
20 625 Heavy duty lock clamps
10 352 10" x 24" vertical full division plate, type E
50 353 10" x 24" vertical skeleton division plate, type E
140 201 3/4" x 24 " form pins
Total Weight for 100 linear feet = 1,610 lbs.

Curb and gutter configurations must be verified before placing orders to ensure proper components are ordered. View dee's ordering guidelines now.

Transition Forming

dee manufactures forms for transitioning from radius curb and gutter forms to straight forms (or from straight forms to radius curb and gutter forms). dee's transition forms are engineered to provide a fast conversion by allowing you to attach either a male or female piece.

Learn more about transitioning on our Installation and Transition page or download our Installation and Transition Guide (1.8MB PDF)

Flatwork Forms | Curb & Gutter Forms | High Curb Forms | Paving Forms | Seawalls & Marine Forms | Custom Forms | Nail Stakes | Dowels | Accessories & Parts | Public Works

About dee Concrete | General Concrete Information | FAQs | Contact Us | Home